Home / Products / Indoor Lighting / Industrial Lighting / Aquaforce Pro / Aquaforce Pro S / AQFPRO S LED4300-840 PM WB HF TW

Aquaforce Pro / AQFPRO S LED4300-840 PM WB HF TW

92918922

Data Sheet

An IP66, dust and moisture resistant LED luminaire. Electronic, fixed output control gear. With wide beam distribution. Class I electrical. Canopy: light grey polymethylmethacrylate. Diffuser: high transmission opal polymethylmethacrylate with refraction prisms. Patented snap-on mechanism EasyClick for clipless mounting of diffuser. For surface or suspended mounting. Quick-fix brackets supplied for surface mounting. Suitable for ceiling or wall (both vertically and horizontally). Approved for indoor use or in canopied outdoor areas (see installation instructions). Mounting kits for conduit, chain suspension and catenary suspension are available as accessories. Suitable for through wiring with H05VV or NYM cable (rated 10A). Equipped with through wiring kit. ambient temperature: -10°C to +35°C. Complete with 4000K LED..

Note: please contact your consultant if you are planning to use the luminaire in environments with chemical pollutants, high or condensing humidity and major variations in temperature.

Dimensions: 1100 x 92 x 90 mm
Luminaire input power: 30.2 W
Luminaire luminous flux: 4480 lm
Luminaire efficacy: 148 lm/W
Weight: 1.72 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:4480 lm
  • Luminaire efficacy*:148 lm/W
  • Colour Rendering Index min.:80
  • Ballast:1 x 28000680 LC 50W 100-400mA flexC lp EXC
  • Correlated colour temperature*:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam):3
  • Rated median useful life*:L80 100000 h at 25 °C
  • Luminaire input power*:30.2 W Power factor = 0.88
  • Dimming:HF
  • Maintenance category CIE 97:E - Dust-proof IP5X
  • Total harmonic distortion (THD):13.61 %
  • LED
  • D
  • Food
  • GLedReP
  • 850°
  • Hfree
  • IK03
  • IP66
  • LLedReP
  • RCM
  • SC1 - Protection Class 1
  • Ta= -10 to +35

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)